Akasa AK 15-NSBLPC

Advantages: Very cool, easy to install
Disadvantages: copper on the cpu side far from mirror ( needs a polish )

...Test system: processor - AMD Athlon FX62 (2 x 2800 MHz / 125W TDP) motherboard - ASUS M2N32 DeLuxe Wireles Edition (passive cooling system with HeatPipe) Cooler is very easy to install just one lever. More experienced users will probably remove thermal compound and polish the surface of the cooler ( it is far from being a mirror ) and then apply high quality thermal compound. This will give You another 1-2 C less and faster cooling down after stress. all tests were done using Zalman STG 1 ( high quality thermal compound ) Temperature readings after 60 minutes in idle: Akasa AK-876 37 Arctic Cooling 64PRO 38 Scythe Katana II 39 Temperature readings after 60 minutes in 100% load: Akasa AK-876 56 Arctic Cooling 64PRO 58 Scythe Katana II 61 Temperature readings... Read review

Ciao members have rated this review on average helpful

Advantages: Non-conducting, easily applicable, very good cooling
Disadvantages: tube is rather small, for approx 10 applications

...When buying a CPU or Graphics card, most manufacturers have already installed or included a heatsink + thermal conducting paste or pad with the product. This thermal conducting paste is usually made of silicone, either grey or white and has the effect of filling the gaps between the heatsink and the chip, to improve heat transfer from one surface to the other. So you are wondering why companies like Akasa produce heatsink paste when something is already included. The answer is that the Akasa product (TC 5022 Pro) performs significantly better than the standard one and holds its ground against other pastes (like Arctic Silver). The paste comes in a small tube and is pretty expensive. The compound is made of silicone, but has the benefit that it is easily applied on surfaces, as well as performing very good, even when not applying too... Read review

Ciao members have rated this review on average helpful

Advantages: Gets rid of even silver thermal paste, in seconds!
Disadvantages: Smell gives you a headache

...simply: > Scrape off most of the old thermal paste with plastic or a cloth. > Apply solution with a clean dry cloth (lint free cloth recommended, such as lense cleaning cloth whitch I used) > Leave for 1-2 minutes, but it worked in about 15 seconds for me. > Then just wipe it off and its gone like magic! I definately recommend this for any computer builder and will be using it in further computers that I build. Please dont forget to rate my review :)... Read review

Ciao members have rated this review on average helpful