Akasa is the leader in thermal integration solutions. Basing on quality and consistency, Akasa continues to produce new and innovative components to excite the high end... more
This review already contains more than 120 words. As a Ciao member you could earn up to £5 with this review.
Akasa is the leader in thermal integration solutions. Basing on quality and consistency, Akasa continues to produce new and innovative components to excite the high end market. PRODUCT FEATURES: 6 location point clip for extra safe retention; Single process forge copper base; Forge round pin fin heatsink.
Advantages: Very cool, easy to install Disadvantages: copper on the cpu side far from mirror ( needs a polish )
...Test system:
processor - AMD Athlon FX62 (2 x 2800 MHz / 125W TDP)
motherboard - ASUS M2N32 DeLuxe Wireles Edition (passive cooling system with HeatPipe)
Cooler is very easy to install just one lever.
More experienced users will probably remove thermal compound and polish the surface of the cooler ( it is far from being a mirror ) and then apply high quality thermal compound.
This will give You another 1-2 C less and faster cooling down after stress.
all tests were done using Zalman STG 1 ( high quality thermal compound )
Temperature readings after 60 minutes in idle:
AkasaAK-876 37
Arctic Cooling 64PRO 38
Scythe Katana II 39
Temperature readings after 60 minutes in 100% load:
AkasaAK-876 56
Arctic Cooling 64PRO 58
Scythe Katana II 61
Temperature readings...
Read review
Ciao members have rated this review on average helpful
Advantages: Non-conducting, easily applicable, very good cooling Disadvantages: tube is rather small, for approx 10 applications
...When buying a CPU or Graphics card, most manufacturers have already installed or included a heatsink + thermal conducting paste or pad with the product.
This thermal conducting paste is usually made of silicone, either grey or white and has the effect of filling the gaps between the heatsink and the chip, to improve heat transfer from one surface to the other.
So you are wondering why companies like Akasa produce heatsink paste when something is already included. The answer is that the Akasa product (TC 5022 Pro) performs significantly better than the standard one and holds its ground against other pastes (like Arctic Silver).
The paste comes in a small tube and is pretty expensive. The compound is made of silicone, but has the benefit that it is easily applied on surfaces, as well as performing very good, even when not applying too...
Read review
Ciao members have rated this review on average helpful
I have a very thin ATX case, so noise is heard from the CPU fan. The one that came with my AMD 64 X2 was okay, but had a rattle like a HDD clicking, so it had to go.
I did a lot of looking around for Socket AM2 low noise CPU heat sink/fans and this was... more
This product has not yet been reviewed. 
19.09.2007
17.07.2007
26.05.2004
