The Allied Telesis' AT-RS700 series Ethernet switches significantly enhance network productivity by providing a full 10 Mbps link to each attached PC or hub. The improved network... more
This review already contains more than 120 words. As a Ciao member you could earn up to £5 with this review.
switching solutions to desktop and small network environments. Each switch features full auto-negotiating 10/100 ports which automatically detect speed and duplex modes of attached devices, allowing the switch to automatically configure for the best possible performance.Choose from 5, 8, 16, or 24 port models. With both internal or external power supplies, the AT-FS700 series can meet a multitude of power requirements. Wall, desk, and rack mounting options give users ultimate flexibility in choosing a model to meet their physical deployment requirements.The AT-FS700 series switches are fully auto-configuring requiring minimal or no set-up by the user. The autosensing ports allow seamless and simple connectivity between existing 10Mbps Ethernet and 100Mbps Fast Ethernet UTP devices, and all units can be installed in minutes. All models are equipped with a MDI/MDIX port(s) for simple connection to other hubs and switches. Front panel LEDs allow users to monitor the switch status providing simple "at a glance" management.
switching solutions to desktop and small network environments. Each switch features full auto-negotiating 10/100 ports which automatically detect speed and duplex modes of attached devices, allowing the switch to automatically configure for the best possible performance.Choose from 5, 8, 16, or 24 port models. With both internal or external power supplies, the AT-FS700 series can meet a multitude of power requirements. Wall, desk, and rack mounting options give users ultimate flexibility in choosing a model to meet their physical deployment requirements.The AT-FS700 series switches are fully auto-configuring requiring minimal or no set-up by the user. The autosensing ports allow seamless and simple connectivity between existing 10Mbps Ethernet and 100Mbps Fast Ethernet UTP devices, and all units can be installed in minutes. All models are equipped with a MDI/MDIX port(s) for simple connection to other hubs and switches. Front panel LEDs allow users to monitor the switch status providing simple "at a glance" management.
- Non-blocking architecture - Auto-negotiation ports - Auto MDI/MDIX ports - Transparent to VLAN packets - Half & Full Duplex flow control - External, internal or I
VLANs to segregate traffic, QoS to prioritize mission-critical data such as voice or video packets, and link aggregation to create traffic pipelines. The AT-GS950/16
fixed-configuration platform. Featuring easy installation and exceptional reliability, this 10/100 switch comes with one gigabit uplink port with the option of the integrated Copper 10/100/1000 port or a 100 or 1000 SFP slot for fiber connectivity.
fixed-configuration platform.Featuring easy installation and exceptional reliability,this 10/100 switch comes with one gigabit uplink port with the option of the inte
Telesyn AT-GS900 Series of unmanaged Gigabit switches delivers the high-speed and high-performance demanded by today?s high-bandwidth applications such as video,
be mounted to the wall or desktop. The AT-FS717FC is fully auto-configuring, which means minimal set up for you. Auto-sensing ports connect existing 10Mbps Ethernet a
for Gigabit connections. It is an ideal fit for small to mid-sized businesses. With the Web-based interface, you can set up 802.1Q VLANs to segregate traffic, QoS to
The Allied Telesis' AT-RS700 series Ethernet switches significantly enhance network productivity by providing a full 10 Mbps link to each attached PC or hub. The improved network performance enables high-bandwidth applications such as multimedia, image processing, and video between workgroups. Each switch features two 10/100 uplink ports which can automatically negotiate the speed and operating mode with the remote end. The RS700 series switches are easily installed, requiring no upgrades to existing desktop computers, Network Interface Cards (NICs), network software or cabling
Power
Power Device: Power supply - integrated
Voltage Required: AC 110/220 V ± 10% ( 50/60 Hz )
Software / system requirements
Software Included: Drivers & Utilities
Manufacturer warranty
Service & Support: 5 years warranty
Service & Support Details:
Limited warranty - parts and labour - 5 years - carry-in
Advantages: Cheap, Easy to configure Disadvantages: SFP GBIC ports are shared with copper ports, loud fan.
...I haven't found a cheaper 16port Gigabit Ethernet switch than this Netgear. This 19" rack or desk mountable switch has 16 copper ports and two SFP GBIC ports. The GBIC ports are shared with copper ports 15 & 16 - so you get to use either or, not both, which is a bit of a shame - but they do say it is a 16portswitch after all... They have at least given you the option of adding either short or long range fibre capability to the switch.
The switch will work out of the box as if it were unmanaged, but then you'd be missing the point...
The switch is manageable via its built in web server, which provides an easy to use interface to all the common functions you would expect - 802.11Q VLAN tagging, Quality of Service, Jumbo frame support, 802.3ad link aggregation. You can upgrade the firmware using the web interface too, keeping...
Read review
Ciao members have rated this review on average helpful
Advantages: Easy to set up, configure and use Disadvantages: None
...We currently run an 80 user network in our office. While the main traffic of our network is handled by 6, 24 port rack mounted switches, my little IT office has 7 PCs in it with not enough ports on the wall to connect them up.
this poses a problem. To connect to our network, you need a network connection on the Wall. There are 4 connections in our office and 7 machines. Obviously 7 into 4 does not go so a solution was needed.
The answer?
A small desktop based switch that would allow us to connect up to 16 computers to one Network connection on the wall.
The Product?
Well we use Netgear equipment in our office because you know with Netgear, you are buying quality at an affordable price.
So we opted for the FS116 Desktop Switch.
The size of it?
Well its about an inch high and about a foot long. It is about 6 inches from fron to back...
Read review
Ciao members have rated this review on average helpful
Advantages: Easy installation, small, sturdy, quiet, auto uplink Disadvantages: Runs quite hot
...This is a 10/100/1000Mbps switch with 5 auto-sensing ports
Visual Description
A compact unit measuring 16cm x 10cm x 3cm (approx)
Housed in a very sturdy blue metal casing with venting slots on the side and back
Looks very professional
5 Front mounted UTP sockets
Rear mounted PSU socket (12 Volt, 1.2 Amp, Centre Positive) and Earth tag
LED indicators to display 10Mb, 100Mb, 1000Mb connection, Activity, Full Duplex, Collisions and Power
Installation
The GS105 switch comes supplied with manuals, 12 Volt (1.2Amp) PSU, ethernet cable, and the unit itself. Installation is very simple and requires no configuration as this is an un-managed switch. Simply connect your existing CAT5 cables from your PC to the switch, it will detect the connection speed and cable type. No need to worry about using cross-over cables or straight through cables...
Read review
Ciao members have rated this review on average helpful
This product has not yet been reviewed. 
18.07.2007
06.05.2004
11.09.2005
