Postage & Packaging: £3.99 Availability: Usually dispatched within 24 hours...
Product Information for "Dynamode POTS filter" »
Manufacturer's product description
The M-ADSL-FILTER has been specifically designed to implement the functionality of low pass filter in G.Lite system.G.Lite technology is similar to full rate ADSL in using DMT technology but operates at a lower data rate of up to 1.5Mbps downstream and 512Kbps upstream, depending on line conditions and lengths. ADSL Lite is proposed as a lower speed version of ADSL that will eliminate the need for telecom to install and maintain a premises based POTS splitter. It was found necessary to include one or more low pass filters in series with the POTS terminals in order to reliably achieve maximum data rates.For POTS voice band service, the low pass filter provides protection from ADSL signal which may impact through non-line or other effects remote devices(handset, fax, voice band modem etc)and central office operation . For ADSL signal, it also provides protection from the high frequency transient and impedance effect that occur during POTS operation (ringing transients, on-hook, off-hook transient and so on). Because the POTS splitter connects directly to the subscriber loop media, it must also provide some protection for externally induced line hits or faults which could damage any attached equipment or endanger humans interacting with the installed equipment. The circuit protection will be provided mostly by standard central office line protection means and additional protection measures built into pots splitter to protect against line overstress which could damage the splitter itself.
M-ADSL-FILTER, M-ADSL-FILTER 100PK
100 (specifications are for single item)
Digital Signaling Protocol
Protocols & Specifications
ITU G.992.2 (G.Lite)
Analogue Ports Qty
Digital Ports Qty
Expansion / connectivity
1 x modem - ADSL - RJ-11 ¦ 1 x modem - phone line - RJ-11