550mm mitre saw featuring a 400mm solid pressure cast saw table with 9 pre-set mitres, clamp & adjustable length stop. TuV Gs approved. Includes a 550mm saw blade with hard point... more...teeth. With free delivery!
1200w Motor - 5000 RPM laser mitre saw. Tablerotation range 45 degrees left to 45 degrees ... more
right. Bevel cut range 0-45 degrees.Cutting capacities:90 deg x 90 deg - 60 x 110mm45 deg x 90 deg - 42 x 110mm90 deg x 45 deg - 60 x 75mm45 deg x 45 deg - 30 x 75mmCast aluminium base with extension supports andclamping set. Blade size 210 x 30mm bore. Silverline Tools has a 3 Year Guarantee on all mains and battery power tools and a 1 year guarantee on all petrol power tools.
Postage & Packaging:Free! Availability:Usually dispatched within 1-2 business days...
Perusing the garden tools section for a tool that I own and so could write about I came across a Silverline SW21 525 mm Pruning Saw . Now I suppose technically I do not own this but it belongs to the Butterfly conservation work party that I belong to . We store this in our garage for winter work parties clearing shrub on nature reserves.
I have used this saw several times clearing encroaching shrub.
This saw has an orange coated heavy gauge, oval steel frame this tapers to a point. The 525mm saw blade attaches to this. There is a quick release tension lever for this blade, this is attached to the flat handle part of the oval frame. The orange frame of ours has got scratched with use and has a little rust
The blade is a Swedish steel blade with many hard point teeth. This blade gives a fair cut through branches and small tree ...
Advantages: Good value, makes the job easier Disadvantages: Comes with no clamps to hold wood in place
Our DIY story
-------------
After painting our living room half and half we needed something to break up the two colours, but what? We didn't want yet another border in our house and a nice crisp line was a no go especially on an embossed wall paper.
Solution dado rail.
As per usual we went full steam ahead and made do with the tools we had to get the job done. Big mistake!
The first piece was quite easy using a wooden mitre box to cut the 45 degree angle and a saw but as to what type of saw it was, I have no idea, I think I will have to ask Handy Andy.
Piece of cake we thought that was until we had to cut a new angle right on the end of the dado rail for the next piece to slot in behind.
My husband did the sawing whilst I held it in place which proved difficult and after several pieces cut wrong and angles slightly ...
Advantages: cutts those hedges Disadvantages: none
Perusing the garden tool category again I recognise these Silverline wooden handle shears. These are ones our conservation work party group has. We store the tools in our garage, hubby goes to most work parties clearing and working on sites . I use these shears occasionally in the garden although I prefer the spear and Jackson ones I have.
These shears are reasonably comfortable to hold. They have smooth wooden handles. These wooden handled shear have that rustic look .
The blades are Teflon coated helps to keep them clean and rust free. Its best to wipe blades clean after use. The blades cut well they are quite sharp. These shears are designed for cutting hedges I did cut one of my hedges in the garden with them earlier this year. Although they manage to cut thin branches well enough I am not so sure about their ...
550mm mitre saw featuring a 400mm solid pressure cast saw table with 9 pre-set mitres, clamp & adjustable length stop. TuV Gs approved. Includes a 550mm saw blade with hard point teeth. With free delivery!
