Product Information for "Xilence XQ Interceptor PRO" »
Manufacturer's product description
The Interceptor PRO from Xilence represents an HPTX case of the very best quality. Its modular construction gives you the choice: You can decide if you would like to build a high end model with an extreme cooling system, or whether you would like to set up a space for both, your home media server and high end gaming system. Hot swap SSD/HDD support, space for a triple and quad radiator, countless cable and hose routes as well as ten PCI slots all come together to present an unprecedented combination of practical case features. Sufficient space for perfect cable management can be found between the rear wall of the motherboard and the side panel of the case. Four DVD slots are located in the front along with a total of ten hot swap bays, into which you can mount six 2.5/3.5" and four 2.5" drives, depending on your preference. These drives are cooled by two 120 mm fans located in the door in front of the drive slots. The upper section houses USB 2.0 and 3.0 connections, audio inputs and outputs as well as a power and a reset button. The air output can be adjusted using a slide control.Any hardware enthusiast is used to make regular changes to hardware solutions. Switching hard drives is particularly difficult and might also be risky. Data is often lost, as the sensitive SATA sockets break off or the drive itself is shaken too much during insertion or removal. The Interceptor solves this problem with numerous hot swap inserts. The drives are fixed into installation frames and can be slotted in from outside with ease. The data connections and energy supply are established automatically. So, there is no need to open the case.
Max Mainboard Size
ATX, microATX, Mini-ATX, HPTX
Internal Bays Qty
Front Accessible Bays Qty
Hot-Swap Bays Qty
Front : 120 mm fan x 2 / intake / red LED ¦ Rear : 140 mm fan x 1 / exhaust ¦ Side : 230 mm fan mount x 1 / 2 x 120/140 mm fan supported ¦ Top : 230 mm fan mount x 1 / 3 x 120 mm or 2 x 140 mm fan supported ¦ Top : 230 mm fan mount x 2 / 4 x 120 mm or 3 x 140 mm fan supported
System Cabinet Features
Side panel dust filter, side metal mesh ventilation, removable dust filter, meshed front panel, adjustable air inflow, front dust filter, floor dust filter, cable management holes, water cooling holes, cable management clamp
Expansion / connectivity
6 (total) / 6 (free) x front accessible - 5.25" ¦ 4 (total) / 4 (free) x hot-swap - 2.5" / 3.5" shared ¦ 2 (total) / 2 (free) x internal - 3.5"
10 x PCI
4 x USB 2.0 ¦ 1 x USB 3.0 ¦ 2 x headphones - mini-jack ¦ 2 x microphone - mini-jack