The MCP multichannel PA amplifiers are suitable for versatile applications. For increased power output, separate channels can be combined in pairs in...... more
The MCP multichannel PA amplifiers are suitable for versatile applications. For increased power output, separate
channels can be combined in pairs in bridge operation. High pass filters and low pass filters which can individually be switched for each
channel allow the use as a 2-way system without the need for additional crossovers. Level adjustment is tamper-proof due to recessed potentiometers on the rear side.
6-
channel PA amplifier with integrated limiter
6 x 150 W/4 ohms, PA amplifier with integrated limiter for multi-zone applications ,
6 x 150 W/4 ohms, 8-ohm bridge operation possible, Signal inputs via balanced XLR mounting jacks or terminal blocks, Speaker connection via terminal blocks, High pass filter, low pass filter can be switched on additionally for each
channel, Tamper-proof level adjustment on the rear panel, 7-fold output meter with clip LED per
channel, Speaker switch-on delay, Groundlift switch against humming, Fan cooling, Robust steel chassis with aluminum front, Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs, Rack installation with 3 unitsPower supply:115/230 V AC, 50/60 Hz ~ Power consumption (max.):1400 W Power output sine:4 ohms:
6 x 150 W 8 ohms:
6 x 100 W 8 ohms bridged:3 x 300 W Frequency range:22 - 25000 Hz Damping factor:>200 Distortion factor:0.01 % SN ratio:97 dB
Channel separation (at 1 kHz):51 dB Slew rate:>30 V/µsec Min. input sensitivity:0.77 V Input impedance:12 kohms (unbalanced), 22 kohms (balanced) Input connectors:
6 x XLR female,
6 x terminal block Output connectors:
6 x terminal block Control elements:Power switch, level control per
channel, crossover on/off per
channel, high/low pass per
channel, mode switch (stereo/bridged) Indicators:Level with clip per
channel, bridged Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage Construction:Steel chassis with aluminum front panel Dimensions:310 x 482 x 132 mm Minimum mounting depth:320 mm Weight:17.5 kg
... less