Advantages: Very cool, easy to install
Disadvantages: copper on the cpu side far from mirror ( needs a polish )

...Test system: processor - AMD Athlon FX62 (2 x 2800 MHz / 125W TDP) motherboard - ASUS M2N32 DeLuxe Wireles Edition (passive cooling system with HeatPipe) Cooler is very easy to install just one lever. More experienced users will probably remove thermal compound and polish the surface of the cooler ( it is far from being a mirror ) and then apply high quality thermal compound. This will give You another 1-2 C less and faster cooling down after stress. all tests were done using Zalman STG 1 ( high quality thermal compound ) Temperature readings after 60 minutes in idle: Akasa AK-876 37 Arctic Cooling 64PRO 38 Scythe Katana II 39 Temperature readings after 60 minutes in 100% load: Akasa AK-876 56 Arctic Cooling 64PRO 58 Scythe Katana II 61... Read review

Ciao members have rated this review on average helpful

Advantages: Keeps my drives nice and cool, Cheap
Disadvantages: One fan began to make horrible noise

...This is a great cheap way to add a cooler to your hard drive. My hard drive was constantly getting overheated and ended up cutting out often. So I went on a mission to find a hard drive cooler that will allow me to continue to use the 3.5" bay. And I found this! When you get this, it comes with screws and an inbuilt power splitter, incase you're out of moldex conectors. You screw the cooler onto the bottom of your hard drive with the screws that came with it. Once you've plugged in the power it should be already to go. Turn on your computer, and you're able to see the fan working it's wonders. The fan does an excellent job at cooling my drive. The only problem I have is after a while one of the fans malfunctioned and ended up making a horrible loud noise. To solve, I just cut this fan off. The cooler still worked fine for me... Read review

Ciao members have rated this review on average helpful

Advantages: Non-conducting, easily applicable, very good cooling
Disadvantages: tube is rather small, for approx 10 applications

...too much pressure (i.e. the holding clip or screw pressure). Akasa claims that it can be used in a temperature range of -20 to 120 degrees Celsius. I wanted to try the effect of this paste on my 8800 GTX cooler, so I took the card apart (voids the warranty) and removed the existing thermal pad with Akasa TIM Remover (Citrus-based solvent). After the 8800 chip was cleaned up, I applied this paste in a zig zag pattern, evenly covering the chip and then putting the heatsink back on. After moving the cooler in a circular direction to force the air out, I fastened back the screws. Booting up the PC and starting the NVIDIA Monitor, the idle temperature of the GPU was 69 degrees, compared to 76 degrees before. When running Supreme Commander, this temperature went up to 82 degrees, compared to around 86 before. Since the Zalman fan... Read review

Ciao members have rated this review on average helpful

Advantages: Quick way of expanding hard drive space or retrieving data from a damaged laptop.
Disadvantages: Can over heat if left on for serveral hours at a time.

...The Akasa Integral external storage enclosure, is a great device for individuals who wish to perhaps expand there laptop with more hard disc drive space, or perhaps for those who wish to retrieve the data from a damaged laptop, that still has a working hard drive. I found the device incredibly handy when my laptop crashed, and I had no way of accessing the data. All I did was remove the hard drive from the laptop and insert it into the storage enclosure device, and away I went, full access again to all my data, just by plugging it into another desktop or laptop. There’s no complicated software to install on the computer, just plug it In and you can access the data as if it was on a flash drive. There are no mains plugs involved, it use's a USB port from the desktop or laptop to power its self, and it also comes with a protective... Read review

Ciao members have rated this review on average helpful